Best Way To Clean Motorcycle Clutch Plates
Motorcycle clutch plates are an integral part of the bike's transmission system. They connect the engine to the gears and help in changing the speed of the motorcycle. Over time, these plates can accumulate dirt, debris, and oil, causing them to slip and reduce the efficiency of the clutch. Therefore, it is essential to clean the clutch plates regularly to maintain the performance of your motorcycle. In this article, we will discuss the best way to clean motorcycle clutch plates.
Tools Required
Before you start cleaning the clutch plates, you need to gather some tools. Here is a list of things you will need:
- Wrenches
- Screwdrivers
- Brake cleaner
- Scrubbing pad
- Clean rags
- Bucket
- Latex gloves
Step-by-Step Guide to Clean Motorcycle Clutch Plates
Follow these steps to clean your motorcycle clutch plates:
Step 1: Remove the Clutch Cover
The first step is to remove the clutch cover from your motorcycle. Use a wrench or screwdriver to unscrew the bolts that hold the cover in place. Once the cover is removed, you will see the clutch plates.
Step 2: Remove the Clutch Plates
Next, you need to remove the clutch plates one by one. To do this, use a wrench to loosen the bolts that hold the plates in place. As you remove each plate, place it in a clean bucket or container. Once all the plates are removed, you can inspect them for any signs of damage or wear and tear.
Step 3: Clean the Clutch Plates
Now it's time to clean the clutch plates. Start by pouring some brake cleaner into a container. Dip a scrubbing pad into the cleaner and use it to scrub the plates. Make sure to clean both sides of each plate thoroughly. If you notice any stubborn dirt or debris, use a toothbrush to scrub it away. Once the plates are clean, wipe them with a clean rag to remove any excess cleaner.
Step 4: Reassemble the Clutch Plates
Once the plates are clean and dry, it's time to reassemble them. Start by placing a friction plate on the clutch basket. Then, alternate with steel plates until all the plates are in place. Make sure to tighten the bolts to the manufacturer's recommended torque specification.
Step 5: Replace the Clutch Cover
Finally, it's time to replace the clutch cover. Place the cover over the clutch and tighten the bolts in a criss-cross pattern to ensure even pressure. Make sure to tighten the bolts to the manufacturer's recommended torque specification.
Conclusion
Cleaning your motorcycle clutch plates is an easy task that can save you a lot of money in the long run. By following the steps outlined in this article, you can keep your clutch plates clean and efficient. Remember to do this regularly to ensure the smooth operation of your motorcycle. Happy riding!