Convert Motorcycle Turn Signals To Running Lights
Are you looking to add some extra safety to your motorcycle? One easy way to do this is to convert your turn signals to running lights. Running lights are always on, making you more visible to other drivers on the road. This article will guide you through the process of converting your motorcycle turn signals to running lights.
What You Will Need
Before you begin, you will need some tools and supplies:
- Wire strippers
- Soldering iron and solder
- Heat shrink tubing
- Electrical tape
- LED bulbs
- Diodes
- Relay
- Fuse
Step-by-Step Guide
Follow these steps to convert your motorcycle turn signals to running lights:
Step 1: Remove the Turn Signal Bulbs
The first step is to remove the turn signal bulbs from their sockets. This will allow you to work on the wiring without accidentally damaging the bulbs.
Step 2: Install the Diodes
Next, install the diodes. Diodes are important because they prevent the current from flowing back through the turn signal circuit. This will ensure that your turn signals still function properly.
Step 3: Connect the Diodes to the LEDs
Once the diodes are installed, you need to connect them to the LED bulbs. Cut the wires from the LED bulbs and strip the ends. Then, connect the diodes to the LED wires using solder and heat shrink tubing.
Step 4: Install the Relay
Next, install the relay. The relay will allow your new running lights to turn off when you activate your turn signals. Connect the wires from the relay to the positive and negative terminals on the battery.
Step 5: Connect the Relay to the Diodes
Once the relay is installed, you need to connect it to the diodes. Cut the wires from the diodes and strip the ends. Then, connect the diode wires to the relay using solder and heat shrink tubing.
Step 6: Install the Fuse
Finally, install the fuse. The fuse is an important safety feature that will prevent your wiring from overheating and potentially causing a fire. Connect the fuse to the positive wire on the battery.
Conclusion
Converting your motorcycle turn signals to running lights is a simple and effective way to increase your visibility on the road. By following these steps, you can easily install running lights on your motorcycle and ride with added safety and peace of mind.