Motorcycle Goes Into Gear But Wont Move
There is nothing more frustrating than when you try to ride your motorcycle but it won't move despite going into gear. This issue can occur for a variety of reasons, and it can be difficult to diagnose the root cause without proper knowledge about motorcycles. If you're experiencing this problem, don't worry. In this article, we'll discuss the main causes of a motorcycle going into gear but not moving and provide solutions to help you get back on the road.
Clutch Cable
The clutch cable connects the clutch lever to the clutch mechanism. If the clutch cable is loose or broken, you won't be able to disengage the clutch, and your motorcycle won't move. To check if the clutch cable is the problem, pull the clutch lever and see if it feels loose. If it does, you need to adjust or replace the clutch cable. This is a relatively easy fix, and you can do it yourself if you have the right tools and knowledge.
Clutch Plates
Clutch plates are essential components of the clutch assembly that engage and disengage the engine power from the transmission. When the clutch plates wear out, they can slip, causing your motorcycle to go into gear but not move. To check if the clutch plates are worn out, open the clutch cover and inspect them. If they are worn out or damaged, they need to be replaced. This is a more complicated fix, and you may need to seek the help of a professional mechanic.
Gearbox Issues
The gearbox is responsible for the transmission of power from the engine to the wheels. If there is an issue with the gearbox, it can cause your motorcycle to go into gear but not move. Gearbox issues can be caused by various factors, such as low oil levels, damaged gears, or misaligned shift forks. To diagnose gearbox issues, you'll need to take your motorcycle to a professional mechanic for a proper inspection and repair.
Clutch Plates Stuck Together
If you haven't ridden your motorcycle for a while, the clutch plates can sometimes stick together. This can prevent the engine power from reaching the transmission, causing your motorcycle to go into gear but not move. To fix this issue, you need to warm up the engine and gently rev it while pulling the clutch lever repeatedly. This will help loosen the clutch plates and get your motorcycle moving again.
Conclusion
If your motorcycle goes into gear but won't move, it can be frustrating and confusing. However, by understanding the common causes of this issue, you can diagnose the problem and take appropriate action. Remember to always prioritize your safety and seek the help of a professional mechanic if you're unsure about how to fix the problem. With proper maintenance and care, you can keep your motorcycle running smoothly and enjoy riding it for years to come.
