Motorcycle Led Tail Light Strip Wiring Diagram
Motorcycle enthusiasts always strive to make their bikes look and function better. One of the ways to do this is by adding LED tail lights. These lights not only enhance the appearance of the bike but also make it more visible on the road. Installing LED tail lights is a simple process that you can do yourself. In this article, we will provide you with a detailed motorcycle LED tail light strip wiring diagram that will help you install LED tail lights on your motorcycle.
What You Will Need
Before we jump into the wiring diagram, let's first take a look at what you will need for this project. Here is a list of materials:
- LED tail light strip
- Wire strippers
- Electrical tape
- Wire connectors
- Fuse holder
- Fuse (depending on the wattage of your LED light strip)
- 12V battery or power source
Wiring Diagram
Now that you have gathered all the necessary materials, let's move on to the wiring diagram. The wiring diagram consists of three parts: connecting the LED light strip to the power source, connecting the LED light strip to the brake light, and connecting the LED light strip to the turn signals.
Connecting the LED Light Strip to the Power Source
The first step is to connect the LED light strip to the power source. Here is how to do it:
- Start by connecting the black wire from the LED light strip to the negative terminal of the battery or power source.
- Then connect the red wire from the LED light strip to the fuse holder.
- Connect one end of the fuse holder to the positive terminal of the battery or power source.
- Connect the other end of the fuse holder to the red wire from the LED light strip.
- Insert the fuse into the fuse holder.
Connecting the LED Light Strip to the Brake Light
The next step is to connect the LED light strip to the brake light. Here is how to do it:
- Locate the brake light wire on your motorcycle.
- Use your wire strippers to strip a small section of the brake light wire.
- Connect the red wire from the LED light strip to the stripped section of the brake light wire using a wire connector.
- Wrap the wire connector with electrical tape to secure the connection.
Connecting the LED Light Strip to the Turn Signals
The final step is to connect the LED light strip to the turn signals. Here is how to do it:
- Locate the turn signal wires on your motorcycle.
- Use your wire strippers to strip a small section of the turn signal wires.
- Connect the yellow wire from the LED light strip to the stripped section of the left turn signal wire using a wire connector.
- Connect the green wire from the LED light strip to the stripped section of the right turn signal wire using a wire connector.
- Wrap the wire connectors with electrical tape to secure the connections.
Conclusion
LED tail lights are a great addition to any motorcycle. Not only do they make your bike look better, but they also improve your visibility on the road. Installing LED tail lights is a simple process that you can do yourself. Just follow the wiring diagram we provided, and you will have LED tail lights on your motorcycle in no time!