Motorcycle Ran Out Of Gas Now Wont Start
Running out of gas on a motorcycle is a common problem that most riders have experienced at least once. Although it may seem like a minor inconvenience, it can lead to bigger problems if not handled correctly. One of the most significant issues that riders face is when their motorcycle won't start after running out of gas. In this article, we will discuss the possible reasons why your motorcycle won't start after running out of gas and how to fix them.
Reasons Why Motorcycle Won't Start After Running Out Of Gas
There are several reasons why your motorcycle won't start after running out of gas:
Clogged Fuel Filter
A clogged fuel filter is a common problem that can prevent your motorcycle from starting. When you run out of gas, the sediment at the bottom of the tank gets sucked into the fuel filter, clogging it. If the fuel filter is clogged, it will need to be replaced.
Air In The Fuel Lines
When you run out of gas, air can enter the fuel lines, preventing fuel from reaching the engine. To fix this problem, you need to prime the fuel pump by opening the fuel tank cap and turning the ignition on and off a few times. This will allow the fuel pump to pump the air out of the fuel lines.
Bad Fuel Pump
A bad fuel pump can also prevent your motorcycle from starting. The fuel pump is responsible for pumping fuel from the tank to the engine. If the fuel pump is not working correctly, it won't be able to pump fuel to the engine, and your motorcycle won't start. You will need to replace the fuel pump if this is the case.
Dead Battery
If your motorcycle won't start after running out of gas, it could be because of a dead battery. When you turn the ignition on, the battery provides power to the starter motor, which starts the engine. If your battery is dead, it won't be able to provide enough power to start the engine. You will need to charge or replace the battery.
Blocked Carburetor
If your motorcycle has a carburetor, it may have become blocked after running out of gas. The carburetor is responsible for mixing air and fuel before it enters the engine. If it becomes blocked, it won't be able to mix the air and fuel, preventing the engine from starting. You will need to clean or replace the carburetor if this is the case.
How To Fix A Motorcycle That Won't Start After Running Out Of Gas
If your motorcycle won't start after running out of gas, here are some steps you can take to fix it:
Refill The Tank With Gas
The first step is to refill the tank with gas. Make sure you use the correct type of gas for your motorcycle.
Prime The Fuel Pump
If your motorcycle has a fuel injection system, turn the ignition on and off a few times to prime the fuel pump. If your motorcycle has a carburetor, turn the fuel valve on and off a few times to allow fuel to flow into the carburetor.
Clean The Carburetor
If your motorcycle has a carburetor and it is blocked, you will need to clean it. Remove the carburetor from the motorcycle and clean it with carburetor cleaner. Make sure you follow the instructions on the cleaner carefully.
Replace The Fuel Filter
If your motorcycle's fuel filter is clogged, you will need to replace it. Locate the fuel filter and remove it. Replace it with a new one and make sure it is installed correctly.
Charge Or Replace The Battery
If your motorcycle's battery is dead, you will need to charge or replace it. Connect the battery to a charger and follow the instructions carefully. If the battery cannot be charged, replace it with a new one.
Conclusion
Running out of gas on a motorcycle can be a frustrating experience, especially if your motorcycle won't start after refilling the tank. However, there are several reasons why this can happen, and they can usually be fixed with a few simple steps. By following the steps outlined in this article, you should be able to get your motorcycle running again in no time.
