Skip to content Skip to sidebar Skip to footer

Motorcycle Won't Turn On At All

Motorcycles are a great way to get around, but when they won't start, it can be frustrating. There are several reasons why your motorcycle won't turn on at all, from electrical issues to mechanical problems. In this article, we'll discuss the most common causes of motorcycles not starting and what you can do to fix them.

Dead Battery

Dead Battery
One of the most common causes of a motorcycle not starting is a dead battery. If your motorcycle has been sitting for a while or you haven't used it in a long time, the battery may have died. You can check the battery voltage with a voltmeter or take it to a mechanic to check for you. If the battery is dead, you can either recharge it or replace it.

Faulty Starter

Faulty Starter
The starter is responsible for turning the engine over to start the motorcycle. If the starter is faulty or not working properly, the motorcycle won't start. You can check the starter motor by listening for a clicking sound when you press the starter button. If you hear a clicking sound, it means the starter motor is not engaging the engine. You may need to replace the starter motor or have it repaired by a mechanic.

Bad Fuel

Bad Fuel
Bad fuel can also cause your motorcycle not to start. If the fuel is old or contaminated with water or debris, it can clog the fuel system and prevent the engine from starting. To fix this problem, you can drain the old fuel and replace it with fresh fuel. You may also need to clean the fuel system and replace the fuel filter.

Ignition System Failure

Ignition System Failure
The ignition system is responsible for providing the spark that ignites the fuel in the engine. If the ignition system fails, your motorcycle won't start. You can check the ignition system by removing the spark plug and checking for a spark when you press the starter button. If there is no spark, you may need to replace the ignition coil or spark plug.

Broken or Faulty Clutch Switch

Broken Or Faulty Clutch Switch
The clutch switch is a safety feature that prevents the motorcycle from starting unless the clutch is engaged. If the clutch switch is broken or faulty, your motorcycle won't start. You can check the clutch switch by testing it with a multimeter or by bypassing it temporarily to see if the motorcycle starts. If the clutch switch is faulty, you may need to replace it.

Conclusion

In conclusion, there are several reasons why your motorcycle won't turn on at all, from a dead battery to a faulty clutch switch. By following the troubleshooting tips above, you can diagnose and fix the problem yourself or take it to a mechanic if necessary. Remember to always wear protective gear when working on your motorcycle and follow proper safety procedures.

Related video of Motorcycle Won't Turn On At All: Causes and Solutions