Trailering A Motorcycle Without A Wheel Chock
Transporting a motorcycle can be a daunting task, especially if you don't have a wheel chock. A wheel chock is a device that is used to hold the front wheel of a motorcycle in place during transportation. However, not everyone has a wheel chock, and it might not be feasible to purchase one for a single use. In this article, we will discuss how to trailer a motorcycle without a wheel chock.
Why Do You Need A Wheel Chock?
A wheel chock is used to keep the motorcycle in place during transportation. It prevents the motorcycle from moving around or tipping over while on the trailer. Without a wheel chock, the motorcycle can slide around, causing damage to the bike, the trailer, or even worse, causing an accident. Therefore, it is essential to ensure that the motorcycle is secured properly before transporting it.
Steps to Trailer a Motorcycle Without a Wheel Chock
Here are the steps to trailer a motorcycle without a wheel chock:
Step 1: Get the Right Trailer
The first step is to ensure that you have the right trailer. You need a trailer that is specifically designed for motorcycles. The trailer should be long enough to accommodate the motorcycle and wide enough to provide stability. Make sure that the trailer has tie-down points where you can secure the motorcycle.
Step 2: Prepare the Motorcycle
The second step is to prepare the motorcycle for transportation. Remove any loose items such as saddlebags, windshields, or mirrors. These items can get damaged during transportation or fly off and cause an accident. Also, make sure that the gas tank is not full to prevent spills. Lastly, turn off the ignition and remove the key.
Step 3: Secure the Motorcycle
The third step is to secure the motorcycle to the trailer. You can use tie-down straps to secure the motorcycle. The straps should be attached to the trailer's tie-down points and the motorcycle's frame. Make sure that the straps are tight enough to keep the motorcycle in place but not too tight to damage the motorcycle's suspension. Also, make sure that the straps are not rubbing against any part of the motorcycle that can cause damage.
Step 4: Check the Motorcycle
The fourth step is to check the motorcycle before transporting it. Make sure that the motorcycle is secured properly and not moving around. Check the tire pressure, brakes, and lights. Lastly, make sure that the license plate is visible and not covered by any part of the motorcycle or trailer.
Conclusion
Transporting a motorcycle without a wheel chock can be challenging, but it is possible if you follow the right steps. Always ensure that you have the right trailer and tie-down straps to secure the motorcycle properly. Check the motorcycle before transporting it to ensure that everything is in place. With these tips, you can safely transport your motorcycle without a wheel chock.