Harbor Freight Motorcycle Lift Hydraulic Pump Replacement

If you're into motorcycles, you know the importance of having a good motorcycle lift. A motorcycle lift is a tool that is used to lift a motorcycle off the ground to perform maintenance or repairs. It's an essential tool for any motorcycle enthusiast or mechanic. One of the most popular motorcycle lifts on the market is the Harbor Freight motorcycle lift. However, like any tool, it can break down over time. The hydraulic pump is one of the most important parts of the lift, and if it fails, you'll need to replace it. In this article, we'll give you a step-by-step guide on how to replace the hydraulic pump on a Harbor Freight motorcycle lift.

Tools Required

Tools For Motorcycle Lift Pump Replacement

Before you start, you'll need to gather a few tools. Here's what you'll need:

Hydraulic pump replacement
Rubber mallet
Socket wrench set
Flat blade screwdriver
Allen wrench set
Phillips head screwdriver
Adjustable wrench

Step-by-Step Guide

Step By Step Motorcycle Lift Pump Replacement

Now that you have all the tools you need, it's time to get started. Here's a step-by-step guide on how to replace the hydraulic pump on a Harbor Freight motorcycle lift:

Before you start, make sure the lift is in the down position and unplugged from any power source.
Remove the lift's safety bar by removing the cotter pin and clevis pin that hold it in place.
Remove the two bolts that hold the hydraulic pump assembly in place using a socket wrench.
Remove the hydraulic lines that are connected to the pump using an adjustable wrench. Be sure to have a container ready to catch any hydraulic fluid that may spill out.
Remove the four bolts that hold the pump to the mounting bracket using a socket wrench. Use a rubber mallet to gently tap the pump if it is stuck in place.
Remove the pump from the mounting bracket and disconnect the wiring harness by unplugging it from the pump.
Install the new hydraulic pump by reversing the above steps. Be sure to use new copper washers on the hydraulic lines to prevent leaks.
Once the new pump is installed, fill the lift with hydraulic fluid and test it to make sure it is working properly.

Tips and Tricks

Here are a few tips and tricks to keep in mind when replacing the hydraulic pump on your Harbor Freight motorcycle lift:

Related Motorcycle

Be sure to have a container ready to catch any hydraulic fluid that may spill out when you remove the hydraulic lines.
When installing the new pump, be sure to torque the bolts to the manufacturer's specifications.
Use a rubber mallet to gently tap the pump if it is stuck in place.
Be sure to use new copper washers on the hydraulic lines to prevent leaks.

Conclusion

Replacing the hydraulic pump on your Harbor Freight motorcycle lift may seem daunting, but with the right tools and a step-by-step guide, it's a manageable task. By following the steps outlined above, you can replace the pump and get your lift back in working order in no time.