Universal Motorcycle Turn Signal Switch Wiring Diagram
Motorcycle turn signals are important for your safety on the road. They let other drivers know when you’re changing lanes or turning. The turn signal switch is an essential component of the system, allowing you to activate the turn signals at will. In this article, we’ll discuss the universal motorcycle turn signal switch wiring diagram and how to install it on your bike.
What is a Universal Motorcycle Turn Signal Switch?
A universal motorcycle turn signal switch is a device that allows you to activate the turn signals on your bike. It’s called “universal” because it can be used with any type of motorcycle, regardless of the make or model. The switch is typically mounted on the handlebars, and it has a lever or button that you can press to activate the turn signals.
The universal motorcycle turn signal switch is designed to work with a variety of turn signal systems. It can be used with incandescent bulbs, LED bulbs, or a combination of both. The switch is also compatible with most types of motorcycle wiring systems, making it an easy and convenient solution for installing turn signals on your bike.
Wiring Diagram for Universal Motorcycle Turn Signal Switch
The wiring diagram for a universal motorcycle turn signal switch is relatively simple. The switch has six wires: two for the turn signals, two for the running lights, and two for the brake lights. The turn signal wires are usually yellow or green, while the running light wires are usually brown or black. The brake light wires are usually red.
To install the switch, you’ll need to connect the wires to the corresponding wires on your bike. You’ll also need to connect the ground wire to a suitable grounding point on your bike. The wiring diagram will help you identify which wires to connect to which terminals on the switch.
How to Install a Universal Motorcycle Turn Signal Switch
The installation process for a universal motorcycle turn signal switch is relatively straightforward. Here are the steps:
- Remove the old turn signal switch, if necessary. If your bike doesn’t already have a turn signal switch, skip this step.
- Mount the new switch on the handlebars. The switch should be easily accessible and within reach of your thumb or finger.
- Connect the wires to the terminals on the switch. Use the wiring diagram to identify which wires go where.
- Connect the ground wire to a suitable grounding point on your bike. This could be a bolt or screw on the frame or engine block.
- Test the turn signals to make sure they’re working properly. If they’re not, check your connections and make sure everything is properly grounded.
- Secure the wires and switch in place with zip ties or electrical tape.
Tips for Installing a Universal Motorcycle Turn Signal Switch
Here are some tips to help you install a universal motorcycle turn signal switch:
- Make sure you have all the necessary tools and supplies before you start the installation process. This may include wire cutters, crimping tools, electrical tape, and zip ties.
- Double-check your connections before you test the turn signals. Make sure everything is properly connected and grounded.
- Test the turn signals in a safe, controlled environment before you hit the road. This will give you a chance to make any necessary adjustments before you’re out in traffic.
Conclusion
A universal motorcycle turn signal switch is an essential component of your bike’s turn signal system. It allows you to activate the turn signals at will, letting other drivers know when you’re changing lanes or turning. The wiring diagram for the switch is relatively simple, and installation is straightforward if you follow the steps we’ve outlined. With a little bit of time and effort, you can improve your safety on the road and enjoy a more convenient riding experience.