Best Way To Strap Motorcycle On Trailer
Transporting a motorcycle on a trailer can be a daunting task, especially if you are not familiar with the proper techniques for securing it. Properly strapping your motorcycle on a trailer is essential for safety reasons and to avoid any damage to your bike. In this article, we will discuss the best way to strap your motorcycle on a trailer to ensure a safe and secure journey.
Step 1: Choosing the Right Trailer
The first step to safely transporting your motorcycle is to choose the right trailer. Make sure the trailer is the correct size for your motorcycle and is equipped with the necessary straps and tie-down points. The trailer should also be in good working condition and have functioning lights and brakes.
Step 2: Positioning Your Motorcycle on the Trailer
Positioning your motorcycle on the trailer is crucial for proper weight distribution and balance. The bike should be centered on the trailer with the front wheel facing towards the front of the trailer. The kickstand should be up, and the bike should be in gear to prevent any movement during transport.
Step 3: Securing the Front Wheel
The front wheel of the motorcycle should be secured with a wheel chock or a tie-down strap. A wheel chock is a device that holds the front wheel in place, preventing it from moving during transport. If you do not have a wheel chock, you can use a tie-down strap to secure the front wheel to the trailer. Make sure the strap is tight and secure, but not so tight that it compresses the front suspension.
Step 4: Securing the Rear Wheel
The rear wheel of the motorcycle should also be secured with tie-down straps. Loop the straps through the rear wheel, making sure they are not in contact with any brake or suspension components. Tighten the straps until the bike is secure, but not so tight that it compresses the suspension.
Step 5: Additional Tie-Downs
Additional tie-downs may be necessary depending on the size and weight of your motorcycle. You can use straps attached to the handlebars or the frame to keep the bike stable during transport. Make sure the additional tie-downs are tight and secure, but not so tight that they damage any components on the bike.
Step 6: Final Check
Before you hit the road, do a final check to ensure everything is secure. Check all the tie-downs and straps to make sure they are tight and secure. Double-check the position of the bike on the trailer and make sure the lights and brakes on the trailer are working correctly.
By following these steps, you can ensure your motorcycle is safely secured and ready for transport. Remember to always drive carefully and keep an eye on your motorcycle during transport.
