Build Your Own Diy Motorcycle Engine Stand
If you're a motorcycle enthusiast, you know that taking care of your bike is essential to keep it in top condition. One of the most important things to do is to change your oil regularly, and to do that, you need a good engine stand. You can buy one, but why not save some money and build your own? With a few tools and some patience, you can create a sturdy and reliable engine stand that will serve you for years to come.
Materials You'll Need
Before you start building your engine stand, you'll need to gather some materials. Here's what you'll need:
- Two 2x4s, 8 feet long
- One 2x6, 8 feet long
- One 3/4-inch plywood, 24x24 inches
- One 1/2-inch plywood, 24x24 inches
- Four 3-inch swivel casters
- Screws, nails, and wood glue
- Tools: saw, drill, hammer, measuring tape, and level
Building Your Engine Stand
Now that you have all your materials, it's time to start building your engine stand. Follow these steps:
- Using your saw, cut both 2x4s into four 24-inch pieces, and the 2x6 into two 24-inch pieces and two 21-inch pieces.
- Take two of the 24-inch 2x4s and attach them to one of the 24x24-inch plywood pieces using wood glue and screws. Make sure they're flush with the edge of the plywood. These will be the legs of your engine stand. Repeat with the other two 24-inch 2x4s and the other 24x24-inch plywood piece.
- Attach one of the 21-inch 2x6s to the top of each set of legs, using wood glue and screws. These will be the crossbars that hold your engine.
- Attach the four swivel casters to the bottom of each leg, using screws. Make sure they're evenly spaced and level.
- Attach the 1/2-inch plywood piece to the top of the crossbars, using wood glue and screws. This will be the platform that holds your engine.
- Let the glue dry for several hours, then sand any rough edges and corners.
Using Your Engine Stand
Now that your engine stand is built, it's time to put it to use. Simply lift your engine onto the platform and secure it with straps or chains. You can use the swivel casters to move the engine stand around your garage or workspace as needed.
Conclusion
Building your own engine stand is a great way to save money and have a customized piece of equipment that will serve you for years. With a few simple tools and some patience, you can create a sturdy and reliable stand that will make working on your motorcycle engine a breeze.