Cleaning Out A Rusty Motorcycle Gas Tank
As a motorcycle owner, one of the most common issues you may encounter is a rusty gas tank. A rusty gas tank can lead to a variety of problems such as clogged fuel lines, reduced fuel efficiency, and even engine damage. If you're experiencing any of these issues, it's time to clean out your rusty motorcycle gas tank. In this article, we'll provide you with a comprehensive guide on how to do just that.
What You'll Need
Before we get started, let's take a look at the tools and materials you'll need to clean out your rusty motorcycle gas tank:
- Safety gloves and goggles
- A drain pan
- A fuel siphon pump
- A wire brush
- An abrasive pad
- A rust dissolver
- A metal conditioner
- A fuel tank sealer
- A funnel
Make sure to gather all of these materials before starting the cleaning process.
Step 1: Drain The Gas Tank
The first step in cleaning out a rusty motorcycle gas tank is to drain the tank completely. To do this, you'll need to locate the fuel line and disconnect it from the tank. Place the drain pan underneath the fuel line and use the fuel siphon pump to remove all of the gas from the tank. Once the tank is empty, remove the drain pan and dispose of the gas properly.
Step 2: Remove Rust And Debris
After the gas tank is drained, it's time to remove any rust and debris that has accumulated in the tank. Start by using a wire brush to scrub the inside of the tank. This will help remove any loose rust and debris. Once you've removed as much rust and debris as possible, use an abrasive pad to scrub the inside of the tank again. This will help remove any remaining rust and debris.
Step 3: Apply Rust Dissolver
After you've removed as much rust and debris as possible, it's time to apply a rust dissolver to the inside of the tank. There are many different rust dissolvers on the market, but we recommend using one that is specifically designed for motorcycle gas tanks. Apply the rust dissolver to the inside of the tank and let it sit for the recommended amount of time. Once the rust dissolver has done its job, rinse the tank thoroughly with water and let it dry completely.
Step 4: Apply Metal Conditioner
Once the tank is dry, it's time to apply a metal conditioner to the inside of the tank. The metal conditioner will help prevent future rust from forming in the tank. Apply the metal conditioner to the inside of the tank and let it sit for the recommended amount of time. Once the metal conditioner has done its job, rinse the tank thoroughly with water and let it dry completely.
Step 5: Apply Fuel Tank Sealer
The final step in cleaning out a rusty motorcycle gas tank is to apply a fuel tank sealer to the inside of the tank. The fuel tank sealer will help prevent future rust from forming in the tank and will also seal any small leaks that may be present in the tank. Apply the fuel tank sealer to the inside of the tank and let it sit for the recommended amount of time. Once the fuel tank sealer has dried, the tank is ready to be filled with gas and used again.
Conclusion
Cleaning out a rusty motorcycle gas tank may seem like a daunting task, but with the right tools and materials, it can be done easily and effectively. By following the steps outlined in this guide, you can ensure that your motorcycle will run smoothly and efficiently for years to come.