Lock N Load Motorcycle Wheel Chock Installation
As a motorcycle owner, you’re probably familiar with the hassle of loading and unloading your bike on a trailer. But with a wheel chock, this task can be much easier and safer. In this article, we’ll walk you through the installation process of the Lock N Load motorcycle wheel chock, one of the most popular options on the market. Whether you’re a seasoned rider or a beginner, you’ll find all the information you need to install this chock and transport your bike with confidence.
What is the Lock N Load Motorcycle Wheel Chock?
The Lock N Load motorcycle wheel chock is a device that secures your bike in place during transportation. It consists of a metal frame that attaches to a trailer or truck bed and a cradle that holds the front wheel of your motorcycle. The chock is adjustable to fit wheels from 14 to 21 inches in diameter and up to 7 inches wide. It can be used with most types of motorcycles, including cruisers, sportbikes, and dirt bikes.
Tools and Materials
Before you start the installation process, make sure you have the following tools and materials:
- Lock N Load motorcycle wheel chock
- Mounting hardware (included with the chock)
- Drill
- 3/8-inch drill bit
- Socket wrench
- Torque wrench
Step-by-Step Installation Guide
Follow these steps to install the Lock N Load motorcycle wheel chock:
Step 1: Position the Chock
Decide where you want to mount the chock on your trailer or truck bed. The chock should be positioned so that the front wheel of your motorcycle will rest in the cradle when the bike is loaded. Make sure the chock is level and aligned with the direction of travel.
Step 2: Mark the Holes
Using a marker or a punch, mark the center of the four mounting holes on the chock frame. These holes should match the holes on your trailer or truck bed.
Step 3: Drill the Holes
Using a 3/8-inch drill bit, drill the four mounting holes on your trailer or truck bed. Make sure the holes are aligned with the marks you made in step 2.
Step 4: Attach the Chock to the Trailer
Place the chock frame over the drilled holes and insert the mounting bolts through the holes in the chock and the trailer or truck bed. Use a socket wrench to tighten the nuts on the underside of the trailer or truck bed. Use a torque wrench to tighten the nuts to the recommended torque (60 ft-lbs).
Step 5: Adjust the Cradle
Loosen the two bolts on the cradle that hold the front wheel stop in place. Adjust the stop to fit the diameter of your front wheel and tighten the bolts.
Step 6: Secure Your Bike
Load your motorcycle onto the trailer or truck bed and position the front wheel in the cradle. Use tie-down straps to secure the bike to the trailer or truck bed. Make sure the straps are tight and that the bike is stable.
Tips for Using the Lock N Load Motorcycle Wheel Chock
Here are some tips to help you use the Lock N Load motorcycle wheel chock safely and effectively:
- Always make sure the chock is securely mounted to the trailer or truck bed before loading your motorcycle.
- Make sure the front wheel of your motorcycle is centered in the cradle before tightening the tie-down straps.
- Use at least two tie-down straps to secure your bike to the trailer or truck bed.
- Make sure the tie-down straps are tight and that there is no slack that could cause your bike to shift during transport.
- Check the tightness of the mounting bolts and tie-down straps periodically during transport to make sure they are still secure.
Conclusion
The Lock N Load motorcycle wheel chock is a great investment for anyone who transports their bike on a trailer or truck bed. With its sturdy construction and adjustable cradle, it can accommodate most types of motorcycles and keep them securely in place during transport. By following the installation guide and tips we’ve provided, you can install and use the Lock N Load chock safely and with confidence.