Skip to content Skip to sidebar Skip to footer

Yamaha V Star 650 Install Fuel Gauge Motorcycle

If you’re the proud owner of a Yamaha V Star 650, you know that it’s a reliable and enjoyable motorcycle. However, one of the drawbacks of this model is that it doesn’t come equipped with a fuel gauge. This can be inconvenient when you’re on long rides and need to keep track of your fuel levels.

Fortunately, you can install a fuel gauge on your Yamaha V Star 650 with a few simple steps. In this article, we’ll guide you through the process of installing a fuel gauge on your motorcycle, so you can hit the road with confidence.

What You’ll Need

Before we dive into the steps for installation, let’s take a look at the materials you’ll need:

  • Fuel gauge kit
  • Drill and drill bit
  • Screwdriver
  • Wire cutters/strippers
  • Electrical tape
  • Wiring connectors
  • Zip ties
  • Owner’s manual
Drill Bit

Step-by-Step Guide

Now that you have everything you need, let’s get started with the installation:

Step 1: Read the Owner’s Manual

Before you begin the installation process, take some time to read the owner’s manual for your Yamaha V Star 650. This will give you a clear understanding of the parts and wiring of your motorcycle, as well as any specific instructions or precautions you need to follow.

Owner'S Manual

Step 2: Locate the Fuel Pump

The fuel pump on your Yamaha V Star 650 is located behind the rear fender. You’ll need to remove the seat and rear fender to access it.

Fuel Pump

Step 3: Install the Fuel Gauge Sensor

The fuel gauge kit should come with a sensor that you’ll need to install on the fuel pump. Use a drill and the appropriate drill bit to create a hole for the sensor. Then, insert the sensor and secure it in place with the provided screws.

Fuel Gauge Sensor

Step 4: Connect the Wires

Next, you’ll need to connect the wires from the fuel gauge sensor to the fuel gauge itself. Use wire cutters and strippers to remove a small section of insulation from the ends of the wires. Then, use wiring connectors to attach the wires to the corresponding connections on the fuel gauge.

Wiring Connectors

Step 5: Secure the Wires

Once the wires are connected, use zip ties to secure them to the frame of the motorcycle. This will prevent them from getting tangled or caught on anything while you’re riding.

Zip Ties

Step 6: Test the Fuel Gauge

Before you finish the installation process, it’s important to test the fuel gauge to make sure it’s working properly. Turn on the ignition and observe the fuel gauge to ensure that it’s accurately displaying the fuel level in your motorcycle’s tank.

Conclusion

Installing a fuel gauge on your Yamaha V Star 650 is a relatively simple process that can make a big difference in your riding experience. With just a few tools and some basic knowledge of your motorcycle’s wiring, you can enjoy the convenience and peace of mind that comes with knowing your fuel level at all times.

Related video of Yamaha V Star 650: Installing a Fuel Gauge on Your Motorcycle