Skip to content Skip to sidebar Skip to footer

Wiring A Phone Charger To A Motorcycle

Motorcycle Phone Charger

Riding a motorcycle is an enjoyable experience, but it can also be a bit challenging, especially when you need to charge your phone. A phone charger is an essential accessory that every motorcycle rider should have. The good news is that you can easily wire a phone charger to your motorcycle. In this article, we'll show you how to do it in a few simple steps.

Things You Will Need

Motorcycle Phone Charger

Before we start, here are some things that you will need:

  • A phone charger
  • A USB adapter
  • Wire crimpers
  • Wire cutters
  • A fuse holder
  • A fuse
  • A voltmeter
  • A screwdriver

Step-by-Step Guide

Step 1: Choose A Location

Motorcycle Phone Charger Location

The first step is to choose a location for your phone charger. You can mount it on your handlebars, near your ignition, or any other place that is convenient for you. Make sure that the location you choose is easily accessible and won't interfere with your riding.

Step 2: Disconnect Your Battery

Motorcycle Battery

Before you start wiring your phone charger, it's essential to disconnect your battery to avoid any electrical shock. Locate your battery and disconnect the negative terminal using a screwdriver.

Step 3: Install The Fuse Holder

Fuse Holder

Next, install the fuse holder near your phone charger. The fuse holder will protect your phone charger from any electrical surges. Cut a piece of wire to connect the fuse holder to the positive terminal of your battery. Use wire crimpers to attach the wire to the fuse holder.

Step 4: Install The USB Adapter

Usb Adapter

Now it's time to install the USB adapter. Connect the USB adapter to your phone charger using a USB cable. Use wire crimpers to attach the positive wire from the USB adapter to the fuse holder. Then, connect the negative wire from the USB adapter to the negative terminal of your battery.

Step 5: Test The Voltage

Voltmeter

Before you start your motorcycle, it's crucial to test the voltage using a voltmeter. Connect the voltmeter to the positive and negative terminals of your battery. The voltage should be between 12 and 14 volts. If the voltage is lower than 12 volts, charge your battery before you start your motorcycle.

Step 6: Reconnect Your Battery

Motorcycle Battery

Once you have tested the voltage, it's time to reconnect your battery. Connect the negative terminal first, then the positive terminal.

Conclusion

Wiring a phone charger to your motorcycle is a straightforward process that anyone can do. With the right tools and a little bit of patience, you can easily wire a phone charger to your motorcycle and stay connected while you ride.

Related video of Wiring A Phone Charger To A Motorcycle